ffHTER GUAGETEMPLATE oFOR ADDING MOUNTING ROLES
(FOR ATTACHMENT OF AUXILIARY FACING)
GABARIT POUR GUIDE DE COUPEAHGULAIRE POUR AJOUTER DES TROUS DE MONTAGE
(POUR F_XERUN GUIDE AUX_LIAIRE)
PLANT_LLA PARA EL CALIBRE DE INGLETES:PARA ANAD_R AGUJEROS DE MOHTAJE
(PARA COLOCAR UN REFREHTADO AUX_LIAR)
FOLLOWSTEPS:
SUmVEZLEaC-TAPES:
SBGALOSPASOS:
C_MTA ADHESIVA CINTAADHES{VA
RUBAN ADHESIF RUBAN ADHESIF
RUBAN ADHI_SIF
CINTAADHESfVA
RUBAN ADRI_S{F
CINTAADHES[VA
Cat out template around outside edges,
pRaseover face of the miter guage,
as shown above, and tape down.
Corte JapJantJJJaaJrededor de Joshordesextefioree, ¢oJ6queJa
sabre Jaoars deJ¢aJJl}rede JngJetes,de Jamanera qua se muestra
m_s arriha, y suj6tala son¢inta adhesiva.
Drill 2 holes =1/4" diameter through
bothwalls (first dfiJJsmaller pilot holes)
Persez 2 trous = 1/'4 pa de diam_tre autravers desdeux
patois (persez d'abord des avant=troue plus petite).
Hags 2 agujeras de 1/4" de di_metro a tray,s de ambas
parades(hags primero agujeras piJatam_apeque_oa)
f
7/8"
1-3/16"
To Next Page
Loading...
