Appliance details
11
830 ES – 6 720 644 936 (2021/08)
Table 3
If appliance is installed at elevations above 2000ft, refer to
chapter 4.3.8 Fan speed adjustment.
Safety devices
• Flame failure device (ionization flame rod sensor)
• Overheat prevention (temperature limiter)
• Inlet temperature sensor
• Outlet temperature sensor
• Back flow temperature sensor
Voltage
Nominal V AC 120
Frequency Hz 60
Amperage
Idle mA 40
Operation A ≤ 2.5
Noise db (A) 45 - 65
Water protection
3)
IP X4D
1) To measure Gas Pressure, see Measuring Gas Pressure, chapter 4.14, page 46.
2) Activation varies with inlet water temperatures from 0.5 - 1.6 gallon/minute (1.9 - 6.1 l/m).
3) Protection against water drops.
Technical characteristics Units 830 ES
To Next Page
Loading...
