English–8
Bosch eBike Systems 1 270 U20 XBP | (23.5.17)
The USB socket is reserved for connecting diagnostic
systems. The USB socket does not have any other function.
The USB connection must always be completely
sealed with the protective cap 8.
Action Buttons Duration
Switch on on-board computer
Any
Switch off on-board computer Any
Increase assistance
+
Decrease assistance
–
Display “TRIP”, “TOTAL”,
“RANGE”, assistance modes –
Switch on bike lights +
Switch off bike lights +
Reset trip distance –+
Activate walk assistance
Perform walk assistance
WALK
+
1.
2. Any
Switch from kilometers to miles
– 1. Hold
2.
Display the versions
1)2)
–+ 1. Hold
2.
Set display brightness
3)
–+
– or +
1. Hold
2.
1) The eBike system must be switched off.
2) The information is shown as scrolling text.
3) The display must be switched off.
To Next Page
Loading...
