Bosch Active Line Original Instructions

English–8
0 276 001 SPI | (3.6.15) Bosch eBike Systems
450 Internal software error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
490 Internal error of the on-board computer Have the on-board computer checked.
500
Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
502
Bike lighting error Check the light and the associated wiring. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
503 Error of the speed sensor Restart the system. If the problem persists, contact your Bosch eBike
dealer.
510
Internal sensor error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
511
Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
530 Battery pack error Switch off the eBike, remove the eBike battery pack and reinsert the
eBike battery pack. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
531
Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
540
Temperature error The eBike is outside of the permissible temperature range. Switch off the
eBike system and allow the drive unit to either cool down or heat up to
the permissible temperature. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
550
An improper load was detected. Remove load. Restart the system. If the problem persists, contact your
Bosch eBike dealer.
580 Software version error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
591
Authentication error Switch off the eBike system. Remove the battery pack and reinsert it. Re-
start the system. If the problem persists, contact your Bosch eBike dealer.
592
Incompatible component Insert a compatible display. If the problem persists, contact your Bosch
eBike dealer.
593 Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
595, 596
Communication error Check the wiring to the transmission and restart the system. If the
problem persists, contact your Bosch eBike dealer.
602
Internal battery pack error while
charging
Unplug the charger from the battery pack. Restart the eBike system. Plug
the charger into the battery pack. If the problem persists, contact your
Bosch eBike dealer.
602
Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
603
Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
605
Battery pack temperature error The eBike is outside of the permissible temperature range. Switch off the
eBike system and allow the drive unit to either cool down or heat up to
the permissible temperature. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
605
Battery pack temperature error while
charging
Unplug the charger from the battery pack. Allow the battery pack to cool.
If the problem persists, contact your Bosch eBike dealer.
606
External battery pack error Check the wiring. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
Code Cause Corrective Measure

Bosch Active Line Specifications

General

Rated Power	250 W
Max Torque	40 Nm
Weight	3.2 kg
Maximum Assistance Speed	25 km/h
Operating Voltage	36 V
Walk Assistance	Yes
Battery Compatibility	Bosch PowerPack
Display Compatibility	Bosch Purion, Intuvia