EasyManua.ls Logo

Bosch AGS50-2 User Manual

Bosch AGS50-2
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation and servicing instructions
Solar pump station for solar thermal systems
AGS10-2, AGS10E-2, AGS20-2, AGS50-2
6 720 811 270 (2015/04) UK
Question and Answer IconNeed help?

Do you have a question about the Bosch AGS50-2 and is the answer not in the manual?

Bosch AGS50-2 Specifications

General IconGeneral
Max Head50 m
Voltage230 V
Frequency50 Hz
Max Flow Rate50 l/min
Protection ClassIPX4

Summary

Key to Symbols and Safety Instructions

General Safety Instructions

Guidelines for safe installation, maintenance, and component handling.

Installing Pipework

General Pipework Information and Sizing

Provides guidelines for pipe network analysis, sizing, and material selection.

Installing the Solar Pump Station

Electrical Connection Procedures

Steps for safely making electrical connections, including safety precautions.

Commissioning

Purging and Filling Procedures

Steps for purging pipework and filling the system with fluid.

Frost Protection and Flow Rate Setting

Guidance on determining frost protection and setting initial flow rates.

Faults and Troubleshooting

Pump and Solar Yield Faults

Identifies causes and remedies for pump malfunctions and low solar yield.

Temperature and Pressure Faults

Addresses issues related to DHW temperature, system pressure, and heat transfer.

Flow and Noise Faults

Troubleshooting guide for flow rate issues and unusual noises in the system.

Related product manuals