Need help?Do you have a question about the Bosch AGS10-2 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | AGS10-2 |
| Category | Water Pump |
| Language | English |
Details the product's basic features and purpose.
Lists technical specifications and available models of the pump station.
Provides energy consumption data and compliance with EU regulations.
Explains how the system integrates with other heat sources.
Shows different hydraulic configurations for solar systems.
Defines the intended application and installation conditions for the pump station.
Lists the system's components and related technical documents.
States compliance with European directives and CE marking.
Details the items included in the product delivery.
Lists tools and additional equipment needed for installation.
Explains the function and placement of air vent valves.
Provides general guidelines and considerations for installing pipework.
Details the specific requirements for laying pipes for different collector types.
Advises on selecting the optimal location and space for the pump station.
Provides instructions for physically mounting the solar pump station.
Covers the procedures and safety precautions for electrical connections.
Notes for electrical connection when using an external controller.
Instructions for installing the safety assembly components.
Details how to connect expansion and pre-cooling vessels.
Explains the need and installation of a pre-cooling vessel for evacuated tube collectors.
Provides instructions for installing the solar expansion vessel.
Guides on calculating and setting the expansion vessel's pre-charge pressure.
Instructions for connecting pipework and the discharge pipe.
Details the installation of temperature sensors for the solar system.
Information on the recommended heat transfer fluid and its properties.
Step-by-step guide for purging and filling the system with fluid.
Details on purging pipework, especially with pre-cooling vessels.
Procedure for conducting a water tightness test on the system.
Instructions for replacing water with the correct heat transfer medium.
Method to check and ensure the system is free of air.
How to determine and set the correct operating pressure for the system.
How to check and set the frost protection level of the heat transfer fluid.
Guidance on adding more heat transfer fluid if frost protection is insufficient.
Instructions for setting the correct flow rate for the pump.
Steps to prepare the system before setting the flow rate.
How to check if the set flow rate is correct.
Details on adjusting the flow rate using the flow limiter.
Final steps to close up the solar pump station after installation.
A checklist for commissioning the solar thermal system and demonstrating compliance.
A record for documenting periodic servicing of the heating system.
Collects general data about the solar system's configuration and components.
Lists tasks for commissioning, inspection, and maintenance with checkboxes.
Tasks related to checking collector groups and their sensors.
Maintenance and checks for the solar storage cylinder.
Checks related to the control system, pumps, and sensors.
Checks for the heat meter and its temperature sensors.
To Next Page