To Next PageTo Next Page
Need help?Do you have a question about the Bosch AQUATAK 1350 and is the answer not in the manual?
General| Max Pressure | 135 bar |
|---|---|
| Max Flow Rate | 440 l/h |
| Hose Length | 6 m |
| Cable Length | 5 m |
| Inlet water temperature | 40 °C |
| Voltage | 230 V |
Procedure for starting the pressure washer and clearing air.
Procedure for stopping the unit and releasing pressure.
Possible causes and remedies when the motor does not start.
Potential reasons and solutions for the motor stopping during operation.
Troubleshooting steps when fuses blow unexpectedly.
Diagnosing issues when the motor runs but there's no working pressure.
