Bosch B3512 - Settings

44
en | Operations Control panels
2018.07 | 01 | F.01U.352.527 Bosch Sicherheitssysteme GmbH
8. Press [ENTER].
P The door state it changed.
How to change the door state with B92x / B91x
1. Open the menu. Refer to B92x / B91x keypads menu and navigation,
page 23.
2. Press 3 to open the [Actions] menu.
3. Press 8 to open the [Access] menu.
4. To lock the door, press 3.
To unlock the door, press 2.
To secure the door, press 4.
To cycle the door, press 1.
5. Enter your passcode.
6. Press [ENTER].
7. To select the door state, use [PREV] and [NEXT].
8. Press [ENTER].
P The door state is changed.
6.8
Settings
6.8.1
Setting the watch mode
Set the watch mode to monitor a point, when the corresponding area is
disarmed. Each time the point is triggered, for instance someone opens
a door, a chime appears at the keypad. No alarm will sound, except for
24-hour points. You can use the watch mode during opening hours,
when the area is disarmed, to monitor when a customer opens a door
and enters a premise.
How to set the watch mode with B94x / B93x
1. Open the menu. Refer to B94x / B93x keypads menu and navigation,
page 20.