Need help?Do you have a question about the Bosch FPD-7024 and is the answer not in the manual?
General| Model | FPD-7024 |
|---|---|
| Category | Control Panel |
| Max Number of Zones | 8 |
| NAC Circuits | 4 |
| Annunciators | Up to 8 annunciators |
| Communication | Digital Communicator |
| Power Supply | 120 VAC, 60 Hz |
| Power Supply Amperage | 3 A |
| Battery Backup | Yes |
| User Interface | LCD Display |
| Operating Temperature | 0°C to +49°C (32°F to +120°F) |
| Humidity Range | Up to 93% non-condensing |
| Weight | 11 lbs |
Provides a general description of the FPD-7024 Fire Alarm Control Panel system.
Details the various hardware components included with the FPD-7024 control panel.
Details various tests that can be performed on the system for verification.
Explains the functionality and configuration of the integrated communicator.
Describes the system for assigning and using PINs for user access and authority.
Details how to program characteristics for individual points or groups of points.
Illustrates the hierarchical structure of the programming menus for system configuration.
Covers PIN management, authority levels, and remote programming security.
Allows configuration of system timers, AC line sync, option bus, and PIN requirements.
Configures whether a PIN is required for local and remote keypad operations.
Configures local and remote NAC outputs for alarm signaling devices.
Details configuration of local and remote relays for system outputs.
Directs different report types to specific phone numbers or IP addresses.
Guides on how to remove previously programmed multiplex devices from the system.
Automatically scans multiplex buses to configure existing or new devices.
Details specific programming requirements for UL Listed installations.
Describes compatible UL Listed accessory devices like the D132B module.
Outlines programming and accessory requirements for commercial fire alarm applications.
To Next Page
