Bosch FPD-7024 - Program Menu Tree

FPD-7024 | Operation and Installation Guide | 4.0 Programming
36
Bosch Security Systems, Inc. | 1/10 | F01U008458-03
4.5 Program Menu Tree
Level 1
(Main Menu)
Level 2 Level 3 Level 4 Level 5
PROG/0
ENTER/#
TEST
HISTORY
DISABLE
DRILL
1- PROG TIME 1- SYSTEM
2 - AUTO TEST
3 - DAYLIGHT SAV
1- TEST TIME
2- TEST FREQ
1- DISABLE
2- ENABLE
2 - SECURITY
1- PINS
2- AUTHORITY
1- PROGRAMR
2- USERS
4 - PROG INPUTS
1- POINT NUMBER
2 - POINT
FUNCTION
3 - POINT COPY
0 - CONFIGURE
1 - LOCAL ONLY
2 - (reserved)
3 - SILENCEABLE
4 -LOOP RESPONSE
5 - (reserved)
<DRILL> NEXT FCT
<HIST> PREV FCT
1 - FIRE
2 - WATERFLOW
3 - SUPERVISORY
4 - (RESERVED)
5 - RESET
6 - SILENCE
1- COPY FROM POINT ___
2 - COPY TO FIRST POINT ___
3 - COPY TO LAST POINT ___
0 - FUNCTION
1 - ALARM/TROUBLE
2 - OUTPUT ZONE
3 - VERIFICATION
4 - LATCHING
5 - DESCRIPTION
<DRILL> NEXT PNT
<HIST> PREV PNT
3- PROG SYSTEM
1- (reserved)
2 - TIMERS
3 - AC LINE SYNC
4 - OPTION BUS
5 - PIN REQUIRED?
6 - (reserved)
7 - REMOTE PGM
1- SMOKE RESET
2 - AC FAIL DELAY
3 - AUTO SILENCE
4 - (reserved)
5 - DISPLAY RATE
1- UPDATE BUS
2- SETUP KEYPAD
1- LOCAL
2- REMOTE
7 - AC FAULT
NOTE: Refer to Appendix D starting on page 93 for factory defaults.