Bosch FPD-7024 - Alpha Programming; Table 17: Programming the Points Using the Alphanumeric

FPD-7024 | Operation and Installation Guide | 4.0 Programming
34
Bosch Security Systems, Inc. | 1/10 | F01U008458-03
4.3 Alpha Programming
When programming the point descriptions, the
numeric keys are used to enter alphanumeric
information similar to the way telephone keys are
used to process information over the phone lines
each key represents four or more letters or
symbols. Refer to Table 17.
A different character is entered each time
a numeric key is pressed. For example,
pressing [2/▲] repeatedly enters A, B, C,
2, A, B, and so on.
Table 17: Programming the Points Using the Alphanumeric
Key Values
1
SPACE
1 , ‘ & / # ! -
1
2
A B C
2
2
3
D E F
3
2
4
G H I
4
2
5
J K L
5
2
6
M N O
6
2
7
P R S
7
2
8
T U V
8
2
9
W X Y
9
2
0
Prog
Q Z 0
#
Enter
Enters the description and returns to the programming menu.
*
Back
Returns to the programming menu without entering changes.
Silence
Moves the cursor one space to the right.
Disable
Moves the cursor one space to the left.
1
Press [1] nine times to reach this value.
2
Press the listed key four times to reach this value.