Bosch B6512 - Page 29

Control panels Operations | en
29
Bosch Sicherheitssysteme GmbH 2018.07 | 01 | F.01U.352.527
How to all arm with B94x / B93x, delay
1. Open the menu. Refer to B94x / B93x keypads menu and navigation,
page 20.
2. Press [On/Off].
3. Press [All On].
4. Press [All On Delay].
5. Enter your passcode.
6. Press [ENTER].
The exit delay time starts.
7. Leave the area.
P The system is all armed.
If you did not leave the area before the end of the exit delay time,
the system automatically is part armed.
How to all arm with B92x / B91x, delay
1. Open the menu. Refer to B92x / B91x keypads menu and navigation,
page 23.
2. Press 1 to open the [On/Off] menu.
3. Press 1 to open the [All On] menu.
4. Press 1 to select [All On Delay].
5. Enter your passcode.
6. Press [ENTER].
The exit delay time starts.
7. Leave the area.
P The system is all armed.
If you did not leave the area before the end of the exit delay time,
the system automatically is part armed.
6.3.2
All arming, instant
All arming the premises without exit delay time.