12
If you have a furnace
1. Select Fossil Fuel and click the setup button to the right
2. Then select Appliance or Thermostat depending on your
personal preferences for fan control.
3. Click Next at the bottom of the screen to continue.
Initial Setup
If you have a dual fuel system
1. Select Dual Fuel and click the setup button to the right
2. Then follow the on-screen instructions to configure the
fossil fuel heating appliance settings
3. Click Next at the bottom of the screen to continue.
Then follow the on-screen instructions to configure
the heat pump heating appliance settings.
If you have a heat pump
1. Select Heat Pump and click the setup button to the right
2. Then follow the on-screen instructions.
3. Click Next at the bottom of the screen to continue.
If you have a boiler
1. Select Fossil Fuel and click the setup button to the right
2. Then select Appliance
3. Click Next at the bottom of the screen to continue.
Unit Configuration
Select your Heat Type according to the heating appliance
located in your home. Below is a list of helpful tips that may
guide you to selecting the correct option for your home.
Note: If you are unsure of which option to select, contact
your local contractor or our support line: 1-800-283-3787.
To Next Page
Loading...
Need help?
General
