5
Included in the box
u Thermostat
u Wall Plate
u Screws & Wall Anchors
u Installation Guide and User Manual
u Wire Labels
Tools you will need
u Small flathead screwdriver
(for fastening the Wall Plate wire terminals)
u Medium Phillips screwdriver
(for attaching the Wall Plate to the wall)
u Smartphone
(for taking pictures of the existing wiring)
u Bosch Connected Control smartphone app
(for configuring the thermostat settings)
Tools you may need
u Needle-Nose Pliers (for pulling wires from the wall)
u Drill with 7/32” Drill Bit (for mounting wall anchors)
u Wire Stripper (for cutting and stripping wires)
u Multimeter (for testing circuit continuity)
u Pen or Pencil (for preventing wires from falling into the wall)
Installation Overview
Once you have everything you need, let’s get started!
To Next Page
Loading...
Need help?
General
