What does 'OVERLOAD SCALE' or 'UNDERLOAD SCALE' mean on my Bosch Kitchen Appliances?
If your Bosch Kitchen Appliance displays 'OVERLOAD SCALE' or 'UNDERLOAD SCALE', it means the measurement is outside the scale's range (-990 g to 5000 g). Do not add more than 5000 g or remove more than 990 g of ingredients.
Why is the water not draining from my Bosch Washer/Dryer?
The water might not be draining from your Bosch Washer/Dryer because the drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose to resolve this. Another possible reason is that the drain pipe or water drain hose is caught or jammed; ensure that they are not kinked or trapped. Also, check that the pump cap is fully screwed in, with the handle in a vertical position.
What to do if the Bosch Washer/Dryer programme does not start?
If the programme on your Bosch Washer/Dryer isn't starting, make sure that you have pressed the start button. Also, check that the door is fully closed and that the childproof lock is deactivated. Ensure that the 'Finish in' option is not activated and that no laundry is caught in the door.
How to fix long drying times on my Bosch Washer/Dryer?
If your Bosch Washer/Dryer is taking too long to dry, it could be due to a few factors. If the ambient temperature is greater than 30 °C or there is insufficient air circulation at the appliance's installation location, ventilate the area. Also, if fluff has accumulated in the drum, run the Cottons 90°C programme without any laundry or detergent.
Why is my Bosch Kitchen Appliances not showing anything on the display and won't turn on?
If your Bosch Kitchen Appliances displays nothing and won't switch on, the issue is likely a lack of power supply. Check that the appliance is properly plugged into the mains.
How to fix Home Connect if it is not working properly on my Bosch Washer/Dryer?
If Home Connect is not working properly on your Bosch Washer/Dryer, it could be due to several reasons. If there is no connection to the home network, go to www.home-connect.com. If Wi-Fi is switched off, activate Wi-Fi on the appliance. If Wi-Fi is activated but a connection to your home network cannot be established, ensure that the home network is available and reconnect the appliance to the home network.
What to do if my Bosch Kitchen Appliances switches off during use?
If your Bosch Kitchen Appliance turns off during use, it could be due to several reasons. First, too much food may have been processed at once or for too long. To fix this, turn the rotary switch to 'y', disconnect the mains plug, reduce the processing quantity, and let the appliance cool down. Second, the swivel arm may have been opened. To resolve this, turn the rotary switch to 'y', press the release button, and push the swivel arm down until it locks. Finally, the bowl or bevel gear might be loose. To correct this, turn the rotary switch to 'y', disconnect the mains plug, tighten the bowl by turning it until it stops, and tighten the bevel gear, ensuring the locking lever is completely closed.
What to do if the pump for the intelligent dosing system on my Bosch Washer/Dryer is blocked?
To address a blocked pump in the intelligent dosing system of your Bosch Washer/Dryer: First, put the appliance into standby mode. Then, clean the pump unit. Switch the appliance on. If the display appears again after cleaning the pump unit, or the programme cannot be started, call customer service.
Why is my Bosch Washer/Dryer water pressure low?
Low water pressure in your Bosch Washer/Dryer could be due to a few reasons. Try cleaning the water inflow filter. Also, make sure that the tap is turned on and that the water inlet hose is not kinked or jammed.
What to do if the unbalanced load detection system has interrupted the spin cycle on my Bosch Washer/Dryer?
If the unbalanced load detection system in your Bosch Washer/Dryer has interrupted the spin cycle, redistribute the laundry in the drum.
To Next Page
General