1 689 989 344 2017-12-12| Robert Bosch GmbH
16 | BEA 750 | en
en – Contents
1. Symbols used 17
1.1 In the documentation 17
1.1.1 Warning notices -
Structure and meaning 17
1.1.2 Symbols in this documentation 17
1.2 On the product 17
2. Standards, directives and approvals 17
2.1 Approvals 17
3. User information 18
3.1 Important notes 18
3.2 Safety instructions 18
3.3 Wireless link (Bluetooth and WLAN) 18
4. Product description 19
4.1 Intended use 19
4.2 Scope of delivery 19
4.3 Product description 19
4.3.1 Computer board interface 20
4.3.2 LED status 20
4.4 Thermal printer 20
4.5 Remote control 20
4.6 WLAN module 20
4.7 Coarse filter 20
4.8 Description of function 21
5. Initial commissioning 22
5.1 Installing the BEA 750 22
5.2 Installing the hoses and connection cables 22
5.3 Selecting the external network printer 22
6. Operation 23
6.1 Transportation 23
6.2 Voltage supply 23
6.3 Switching on the BEA 750 23
6.4 Switching off BEA 750 23
6.5 Remote control 23
6.6 Program description 23
6.7 Print 23
6.8 Troubleshooting 23
6.9 Emissions test on two-stroke engines 24
7. Maintenance 25
7.1 Cleaning 25
7.2 Replacing printer paper 25
7.3 Service intervals 25
7.3.1 Half-yearly maintenance 25
7.3.2 Annual maintenance 25
7.4 Preventive maintenance 26
7.4.1 Leak-tightness of sampling system 26
7.4.2 Exhaust gas sampling probe 26
7.4.3 Exhaust gas sampling hose 26
7.4.4 Coarse filter 26
7.4.5 Checking display stability 27
7.4.6 O
2
sensor 27
7.4.7 NO sensor 27
7.5 Spare and wearing parts 28
7.6 BEA-PC software update by means of
USB stick 28
8. Decommissioning 28
8.1 Temporary shutdown 28
8.2 Change of location 28
8.3 Disposal and scrapping 28
9. Technical Data 29
9.1 Exhaust gas measurement 29
9.2 Specifications 29
9.3 Dimensions and weights 29
9.4 Temperature 29
9.4.1 Air pressure 29
9.4.2 Humidity 29
9.5 MID environment categories 29
9.6 Noise emissions 29
10. Marking of hazardous substances 30
To Next Page
Loading...
