To Next PageTo Next Page
Need help?Do you have a question about the Bosch CCS180 and is the answer not in the manual?
Keep work area clean, well lit, and free from flammable materials. Ensure bystanders are kept away.
Use proper plugs and outlets, avoid grounded surfaces, and use GFCI protection in damp conditions.
Stay alert, wear appropriate Personal Protective Equipment (PPE), and prevent unintentional tool starts.
Use the correct tool, ensure switch functionality, disconnect power for adjustments, and secure workpieces.
Ensure switch is off before battery insertion, use specified chargers, and handle battery packs with care.
Keep tools sharp and clean, check for damage, and perform regular inspections for optimal performance.
Recommend servicing by qualified personnel using identical replacement parts for safety.
Keep hands clear of blade, adjust depth properly, secure workpiece to a stable platform, and use guides.
Understand kickback causes, maintain firm grip, position body correctly, and release trigger if blade binds.
Ensure the lower guard moves freely, closes instantly, and is not clamped open. Check guard spring.
Read instructions, use only specified chargers, avoid damaged equipment, and do not recharge in wet conditions.
Keep battery terminals away from metal objects and avoid exposing batteries to fire or high heat.
Do not disassemble battery; protect terminals and recycle Li-ion batteries in an environmentally sound manner.
Provides a reference for various symbols used on the tool and their meanings.
Identifies and illustrates key parts of the cordless circular saw, including guards and controls.
Lists model, voltage, speed, battery, charger, and cutting capacity specifications for the saw.
Detailed steps for securely attaching the circular saw blade, including safety precautions.
Explains the clutch mechanism for preventing kickback by allowing the blade to slip.
How to set the blade depth for proper cutting, minimizing splintering and blade engagement.
Describes the purpose and operation of the safety switch to prevent accidental starts.
Procedure to check and adjust the saw for a precise 90-degree angle cut.
Instructions on how to adjust the saw's bevel angle for angled cuts up to 50 degrees.
How to utilize the built-in line guide for making accurate straight and bevel cuts.
Proper use of the trigger switch, electrical brake, and general safe cutting practices.
Advises against cutting masonry/metal due to potential guard malfunction and hazardous dust.
Step-by-step guide for safely performing plunge cuts into material.
Guidance on supporting large panels to prevent blade binding and kickback during cuts.
How to perform rip cuts using the rip fence or an auxiliary board guide for accuracy.
Instructions for correctly inserting and releasing the battery pack from the tool housing.
Key information regarding battery temperature limits and optimal charging conditions.
Explains the status of the green and red indicator lights on the BC630 charger.
Step-by-step instructions for charging the battery pack using the BC630 charger.
Explains the status of the green and red indicator lights on the BC660 charger.
Step-by-step instructions for charging the battery pack using the BC660 charger.
Recommends professional servicing and warns against user-serviceable parts to maintain safety.
Alerts users to decreased tool performance indicating the battery pack needs replacement.
Notes on motor lubrication and timely replacement of noisy bearings to prevent failure.
Instructions for safely cleaning the tool, emphasizing disconnection and avoiding certain cleaning agents.
Provides a table of recommended extension cord sizes based on tool current and length.
Lists standard and optional accessories, such as thin kerf blades and a rip fence.
Outlines the one-year limited warranty covering defects in material or workmanship for Bosch tools.
General