To Next PageTo Next Page
Need help?Do you have a question about the Bosch CSW41 and is the answer not in the manual?
Maintain a clean, well-lit work area and keep bystanders away for safe operation.
Ensure proper electrical connections, avoid water exposure, care for the cord, and use GFCI in damp areas.
Maintain alertness, use PPE, prevent accidental starts, ensure balance, and dress appropriately for safe operation.
Use the correct tool for the job, do not force it, and ensure the switch operates correctly.
Follow safe cutting practices, adjust depth, secure workpiece, use proper grip, and employ guides for accurate cuts.
Ensure tool service is performed by qualified personnel using only identical replacement parts.
Understand kickback causes, prevention, and proper operation of the lower guard.
Covers extra warnings, GFCI, power supply, handle care, and chemical dust exposure.
Study and learn the meaning of symbols used on the tool for better and safer operation.
Understand symbols indicating listing by Underwriters Laboratories, CSA, ETL, and NOM.
Diagram illustrating the main components and features of the circular saw.
Details maximum cutting depths at 90°, 45°, and 53°, along with blade size.
Instructions for safely attaching the blade, ensuring correct orientation and proper tightening.
Explains the Vari-Torque clutch for kickback reduction and proper tightening to maintain its effectiveness.
Set cutting depth, check 90° angle, and adjust for bevel cuts up to 45°.
Use foot notches as guides and adjust depth stability for accurate cutting.
Learn the various functions of the included wrench and how to store it properly on the tool.
Properly hold and operate the saw for general cuts and perform plunge cuts safely.
Support large sheets properly and use guides for accurate rip cuts.
Covers professional servicing recommendations and tool lubrication procedures.
Details care for carbon brushes, bearings, and cleaning the tool with compressed air.
Maintain blade sharpness, clean pitch, and select appropriate extension cords.
List of standard and optional accessories available for the circular saw.
Troubleshoot power issues, cord damage, or switch failures if the saw will not start or reach speed.
Address vibration, square cut errors, binding, burning, stalling, or blade slipping.
Covers the one-year limited warranty, exclusions for accessories, and limitations on damages.
Explains limitations on implied warranties and highlights specific legal rights varying by region.
General