en Childproof lock
20
Changing the cooking time
Use the rotary selector to change the cooking time.
After a few seconds, the change is applied.
Cancelling the cooking time
If the timer function has been set, first touch the
0 button. You will now be able to adjust the cooking
time.
Use the rotary selector to reset the cooking time to - - : -
-.After a few seconds, the change will be applied.
Initial use
After connecting the electricity supply or after a power
cut, the display prompts you to set the time. It may take
a few seconds for the instruction to appear.
Setting the time
During initial use, the time display is highlighted.
The‚ƒ:‹‹ value flashes in the display and the 0
symbol lights up. Set the time.
1. Use the rotary selector to set the time.
2. Touch 0.
The time has now been set.
Changing the time on the clock
Note: To change the time on the clock, you will need to
switch off the appliance.
1. Touch the 0 button twice.
The 0 symbol and the clock time will appear on the
display.
2. Set the clock using the rotary selector.
3. Touch the 0 button.
The time has now been set.
Notes
■ If you do not touch the 0 button after setting the
time, the set value is automatically adopted after a
few seconds.
■ If the function selector has been moved to configure
the settings, it must be returned to the "Off" position
once you have finished. Only then can the appliance
be used.
■ In order to reduce the energy consumption of your
appliance in standby, you can hide the clock.
AChildproof lock
Chi l dpr oof l oc k
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Activating and deactivating
1. Turn the function selector to the off position.
2. Touch ] for approx. 4 seconds.
The D symbol will appear on the display. The
childproof lock is activated or deactivated.
Notes
■ If a timer duration t has been set, this will continue
to count down. While the childproof lock is active,
the timer duration cannot be changed.
■ Acoustic signals, e.g. once the timer duration has
elapsed, can be ended by touching any field.
Basic settings en
21
QBasic settings
Ba s i c s et t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
Changing the basic settings
The appliance must be switched off.
1. Touch the 0 button for a few seconds.
The first basic setting will appear on the display.
2. Use the rotary selector to change the basic setting.
3. Touch the 0 button.
The next basic setting will appear on the display.You
can go through all of the basic settings using the
0 button and make changes using the rotary
selector.
4. Touch the 0 button for a few seconds.
This applies all the settings.
If the appliance is in standby mode, you can change the
settings at any time.
Cancelling
If you do not want to save the changes, turn the function
selector. The basic settings are ended without being
saved.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
Basic setting Options Explanation
™‹‚ Audible signal
duration
ƒ = medium =
30seconds
‚ = short =
10seconds
„ = long = 2min-
utes
Audible signal
sounds after a set
cooking time or
duration elapses or
when the timer
reaches zero
™‹ƒ Audible signal but-
ton
‚ = On
‹ = Off Audible signal when
button is pressed
™‹„ Display brightness
ƒ = medium
‚ = low
„ = high
Allows you to set the
display brightness
™‹… Time display
‚ = On
‹ = Off Allows you to display
the clock time
™‹† Interior lighting
‚ = On
‹= Off Allows you to switch
the interior lighting
on or off
™‹‡ Factory setting
‹ = Off
‚ = On Appliance reset to
factory settings
™‹ˆ Demo mode
‹ = Off
‚ = On Allows you to switch
demo mode on and
off
Note: Demo mode
is only visible in the
first 5minutes after
connecting the appli-
ance to the mains.
™‹‰ Audible signal vol-
ume
ƒ = medium
‚ = low
ƒ = high
Setting the audible
signal volume
To Next Page
Loading...
