Why does my Bosch CTL636E 6 say "Clean brewing unit"?
If your Bosch Coffee Maker display shows “Clean brewing unit”, it means that the brewing unit is soiled, there is too much ground coffee in the brewing unit, or the mechanism of the brewing unit is stiff. In this case, clean the brewing unit and do not place more than two level measuring spoons of ground coffee in the drawer.
General| Type | Automatic Coffee Machine |
|---|---|
| Series | 6 Series |
| Model | CTL636E |
| Coffee Bean Container Capacity | 300 grams |
| Display | Yes |
| Pump pressure | 15 bar |
| Milk system | Integrated milk frother |
| Color | Stainless Steel |
| Programmable | Yes |
| Coffee Preparation | Espresso, Coffee, Cappuccino, Latte Macchiato |
| Water Tank Capacity | 1.7 liters |
| Power | 1600 W |
| Power Consumption | 1600 W |
Safety warnings regarding electrical hazards and proper connection.
Warning about permanent magnets affecting electronic implants.
Safety advice concerning packaging material and small parts.
Precautions to avoid injury during operation, e.g., grinding unit.
Warnings about hot beverage outlets and surfaces.
Warning about potential scalding during unattended remote start.
Precautions regarding appliance heat and cupboard door operation.
Adjust coffee strength, temperature, and quantity.
Steps to prepare coffee using whole beans.
Prepare coffee drinks with milk, milk froth, or warm milk.
Steps for preparing coffee using ground coffee.
Instructions for dispensing hot water.
Instructions for inserting, replacing, or removing the water filter.
Setup for automatic or manual connection to Wi-Fi.
Enable or disable the appliance's Wi-Fi function as needed.
Steps to connect the appliance to your WLAN network.
Activate remote start functionality for app control.
View network and appliance identification details.
Detailed steps for manually cleaning the milk system components.
Instructions for removing and cleaning the brewing unit.
Procedure for removing limescale buildup from the appliance.
Steps to perform a general cleaning cycle for the appliance.
Combines descaling and cleaning processes for comprehensive maintenance.
To Next Page