en Basic settings
56
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
14 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
14.1 Changing settings
1. Select "Settings".
a The display shows the list of set-
tings.
2. Change the required setting.
a The appliance saves the setting
automatically.
3. To go back to the menu, press .
4. To exit the settings, press .
Tip:To call up brief information,
press .
14.2 Overview Settings
See here for an overview of the "Settings".
Language Set language.
HomeConnect HomeConnect assistant
→"Setting up
HomeConnect",
Page54
Time Set the current time or
automatically display via
HomeConnect.
Display settings Brightness Set the brightness in
steps.
Clock display Switch the time display
on and off after the appli-
ance has been switched
off.
Clock Set the time display.
1
Depending on the appliance specifications
To Next Page
Loading...
