Bosch D1255RB - Removing the Red Cover; Removing the Faceplate; Setting the Address Switches; Address DIP Switches

D1255RB/D1256RB/D1257RB | Installation Instructions | 3.0 Installation
.
Bosch Security Systems, Inc. | 8/06 | F01U011791B 7
Figure 6: Removing the Red Cover
1 - Red cover
6. Remove the faceplate.
Figure 7: Removing the Faceplate
1 - Faceplate
7. Set the address switches. Refer to Figure 8, Figure 9,,
and Table 1.
Figure 8: Setting the Address Switches
1 - Faceplate
2 - Address switches
Figure 9: Address DIP Switches
123456
O
N
Table 1: DIP Switch Address Settings
Switch Number Address
Number
1 2 3 4
5
∗
6
1
ON ON ON ON ON
2
OFF ON ON ON ON
3
ON OFF ON ON ON
4
OFF OFF ON ON ON
5
ON ON OFF ON ON
6
OFF ON OFF ON ON
7
ON OFF OFF ON ON
8
OFF OFF OFF ON
ENCODING TONE
ON/OFF
ON
∗
Switch 5 toggles the encoding tone ON and OFF. With the
encoding tone turned on, the keypad sounds a beep each
time a key is pressed.