Bosch D296 - Sensitivity setting

Appendices
Accessories
Product Description
Supplied Standard
D306 Remote
Indicator Plate
Monitors the status condition of the
detector and allows the user to measure
a calibration voltage to determine if the
detector is within the calibration range.
Can be mounted on a standard single-
gang box.
Optional
D307 Remote Test/
Indicator Plate
Monitors the condition of the beam
smoke detector and allows the user to
measure a calibration voltage to
determine if the detector is within the
calibration range. Use a Keylock switch
to perform a remote test and detector
reset. Can be mounted on a standard
double-gang box.
D308 Field Test Kit Tests the calibration of the D296/D297
detectors by providing a calibrated
amount of obscuration between the
transmitter and receiver .
5
5.1
14 en | Document Introduction Projected-beam Smoke Detectors
2013.02 | 02 | F.01U.500.951 Application Guide Bosch Security System, Inc.