Bosch D9112B - Phone 1; Ph# Fire Alarm;Res; Ph# Tbl;Res; Ph# Alarm;Res;Cncl

D9112B | Program Entry Guide | 1.0 Panel Wide Parameter EN | 17
Bosch Security Systems | 2/04 | 74-06145-000-D
Table 14: Phone Routing Worksheet – Power/Phone
Report Type Phone 1 Phone 2 Phone 3 Phone 4
Comm Restoral
x x
AC Failure
x x
Battery Low
x x
Phone Line Fail
x x
AC Restoral
x x
Battery Restore
x x
Phone Restoral
Battery Missing
Table 15: Phone Routing Worksheet – Service
Report Type Phone 1 Phone 2 Phone 3 Phone 4
Usr Code Change
x x
Prog Access Bad
x x
Usr Code Delete
x x
Date Change
x x
Prog Access OK
x x
Time Change
x x
Phone
Default: 1
Selection: 1 to 4
Enter the phone’s number for which you are
selecting report group routing.
Ph# Fire Alarm/Res
Default: Blank
Selection: Blank, P, B, or D
See the introduction to Phone Routing for a
description of the selections.
Ph# Tbl/Res
Default: Blank
Selection: Blank, P, B, or D
See the introduction to Phone Routing for a
description of the selections.
Ph# Alarm/Res/Cncl
Default: Blank
Selection: Blank, P, B, or D
See the introduction to Phone Routing for a
description of the selections.
Ph# Trouble
Default: Blank
Selection: Blank, P, B, or D
See the introduction to Phone Routing for a
description of the selections.
Ph# Open/Close
Default: Blank
Selection: Blank, P, B, or D
See the introduction to Phone Routing for a
description of the selections.