Bosch D9112B - Page 89

D9112B | Program Entry Guide | 10.0 Skeds EN | 89
Bosch Security Systems | 2/04 | 74-06145-000-D
Default Description Sub-prompt Selection
S## Area 5
Yes
No
Unbypass all points in Area
5.
Do not unbypass all points
in Area 5.
S## Area 6
Yes
No
Unbypass all points in Area
6.
Do not unbypass all points
in Area 6.
S## Area 7
Yes
No
Unbypass all points in Area
7.
Do not unbypass all points
in Area 7.
S## Area 8
Yes
No
Unbypass all points in Area
8.
Do not unbypass all points
in Area 8.
6 Relay On. The entry in the Relay
On
prompt defines the relay this
Sked activates. The Sked can
activate one relay.
S## Relay Number
Enter a relay number 1 to
128.
7 Relay Off. The entry in the Relay
Off
prompt defines the relay this
Sked turns off. The Sked can turn
off only relays that were set by a
Sked. The Sked can turn off one
relay.
S## Relay Number
Enter a relay number 1 to
128.
8 All Relays Off. This Sked function
turns off all relays that were turned
on by a Sked. This is a panel-wide
function.