Bosch D9412GV2 - Figure 30: Keyswitch Wiring

D9412GV2/D7412GV2 | Operation and Installation Guide | 11.0 Arming Devices
.
Bosch Security Systems, Inc. | 7/09 | F01U003641-04 61
Figure 30: Keyswitch Wiring
1
2
3
4
5
3
4
5
6
7
1 - Maintained keyswitch
2 - Momentary keyswitch
3 - Common
4 - Point input
5 - 1 kΩ or 33 kΩ resistor
∗
6- Open on a circuit arms the area
7 - Short on a circuit toggles the arming state
∗
Use 1 kΩ EOL resistors if using one of the zones on the control panel or an OctoPOPIT. Use a 33 kΩ resistor if using a POPIT.