EasyManua.ls Logo

Bosch D9412GV2 - DIP Switch Settings and Functions; Setting the DIP Switches for Address

Bosch D9412GV2
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D1255/D1255B | Installation Instructions |
Bosch Security Systems | 8/04 | 74-06819-000-F 5
13. Press each key on the keypad toward the top of the
keypad to ensure proper alignment and operation
of each key through the mating keypad faceplate
openings.
Table 3: Wiring Connections
Four-Wire Flying Leads
from control panel
D1255/D1255B Flying
Leads
DATA BUS B (30) To Data Out (Green)
DATA BUS A (31) To Data In (Yellow)
POWER + (32*) To 12 VDC (Red)
COMMON – (29*) To Common (Black)
* = only on the D9412G Control Panel
3.3 DIP Switch Settings and Associated
Functions
Select the address of each keypad and silence the
keypad encoding tone by setting the six-position DIP
Switch (refer to Item 7 in Figure 2) located under the
D1255/D1255B Keypad cover.
3.3.1 Setting the DIP Switches
Switches 1 through 3 assign the address for the specific
keypad. Leave Switches 4 and 6 in the ON position.
For supervised keypads, assign only one
keypad to each address. Switch 5 toggles
the encoding tone ON and OFF. With the
encoding tone turned ON, the keypad
sounds a beep every time a key is
pressed.
Table 4: Switch Settings
Switch
Address #
1 2 3 4 5* 6
1 ON ON ON ON ON
2 OFF ON ON ON ON
3 ON OFF ON ON ON
4 OFF OFF ON ON ON
5 ON ON OFF ON ON
6 OFF ON OFF ON ON
7 ON OFF OFF ON ON
8 OFF OFF OFF ON ON
*Encoding Tone ON/OFF.
4.0 Specifications
Table 5: D1255/D1255B Specifications
Power Nominal 12 VDC supplied by the control panel
Idle: 104 mA, armed or disarmed. Current Required
Maximum: 206 mA, with keypad lighted and warning tone ON.
Wiring Four-wire expansion cable supplies Data In, Data Out, +12 VDC, and Common.
Maximum resistance on the conductors connected to SDI BUS A and SDI BUS B is 25 .
Dimensions
H x W x D
4.6 in. x 8.1 in. x 0.8 in.
(11.6 cm x 20.7 cm x 20.7 cm)
D1255 PMS Warm Gray Color
D1255B White and PMS 429 Gray
Display 16-character vacuum fluorescent display. Each character is a 14-segment unit. Soft blue color.
Operating Temperature +32°F to +122°F (0°C to +50°C)
Relative Humidity 5% to 85% @ +86°F (+30°C)

Table of Contents

Other manuals for Bosch D9412GV2

Related product manuals