To Next PageTo Next Page
Need help?Do you have a question about the Bosch DAF220 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | DAF220 |
| Category | Measuring Instruments |
| Language | English |
Describes the tool's applications: Anglefinder, Protractor, Miter Cut Calculator, and Level.
Instructions for turning the anglefinder on and off, including automatic shut-off.
Explains how to measure angles of structures or workpieces using the main and adjustable legs.
Guide to attaching and using the leg extension for measuring convex angles.
How to copy existing angles from one location to another using the tool.
Using the tool to position a workpiece or cut line at a desired angle.
Steps for storing and recalling angle measurements using the HOLD memory function.
Step-by-step guide to measuring and setting angles for simple miter cuts on a saw.
How to set the initial spring angle, typically for crown molding, using the tool.
Recalling a previously stored spring angle for compound miter cut calculations.
Procedure to measure the corner angle for compound miter cut calculations.
How to get the necessary miter and bevel angle readings for compound cuts.
Guidance on setting the saw's miter and bevel angles based on the tool's readings.
Steps to exit the compound miter cut mode and return the tool to normal operation.
