To Next Page
M
Michael GarzaAug 10, 2025
What to do if my Bosch DDW88MM66 Ventilation Hood is not working?
- JJacqueline PenaAug 10, 2025
If your Bosch Ventilation Hood isn't working, there are several potential causes. Ensure the mains plug is properly connected to the power supply. Check the circuit breaker in your fuse box. Also, verify if there has been a power cut by checking other appliances. Make sure the glass panel is correctly inserted. If liquid has flowed into the appliance, immediately pull out the mains plug or switch off the appliance at the circuit breaker in the fuse box. Finally, empty the drip trays and remove the grease filters cartridges, dry all accessible places, leave the appliance flap open and restart the appliance only after 48 hours, and insert the drip tray and the grease filters cartridges.
General
