Bosch EasyControl User Manual

Product information
3
EasyControl – 6720881858 (2017/10)
CAUTION:
Damage due to incorrect connection.
The device may be damaged if this product is connected incorrectly.
▶ Only have the product installed by an authorised professional.
2 Product information
2.1 EU Declaration of Conformity
The design and operating characteristics of this product
comply with the european and national requirements. Its
conformity with harmonised European standards is declared
by the CE marking.
You can request the EU Declaration of Conformity for the product. See
the contact address on the back cover of these instructions.
2.2 Product Description
You can set the required temperature of a room easily and precisely (to
the nearest half degree) using the Control app. Thanks to the sensors
integrated in the thermostat, you can quickly set a temperature in each
room that is comfortable for you. A time-controlled temperature
program can also be set for every room. An automatic frost protection
program starts at temperatures below 4 °C. The smart radiator
thermostat also regularly opens the radiator valve to prevent
calcification.
2.3 Usage
The product is intended exclusively for installation on radiators
(including convectors and skirting heating) indoors. To ensure the
product works properly, it must be used together with the EasyControl.
▶ Make sure the product is adjusted correctly by following the safety
instructions and other directions in these operating instructions and
in the EasyControl app.
▶ The technical data must be taken into account.
▶ Avoid installation in areas exposed to intense sunlight or in dust-
laden environments.
▶ Do not make any modifications to the product.
2.4 Product overview
Fig. 1
Table 2
2.5 Specifications
Table 3
2.6 Wireless connection faults
Faults in the wireless connection (due to electric motors or faulty
electrical appliances, for example) cannot be entirely ruled out. The
transmission range indoors may deviate significantly from the
transmission range outdoors. In addition to the transmitter power and
receiver properties, environmental effects such as moisture and
structural aspects can impair the performance of the wireless
connection.
Articles Explanation
1. Mode key “0” Operation mode setting
2. Minus key “-” Reduction of set temperature
3. LED display Display of operation and fault displays
4. Plus key “+” Increase setting temperature
5. Display Display of settings, values, processes, operating
and fault displays
10016436-001
5
2
3
4
1
Model of MS Thermostat AA
Batteries 2 x LR6/AA
Battery service life ≥ 2 years
Power consumption ≤120mA
Receive category SRD category 2
Transmit frequency 868.3 MHz, 869,525 MHz
Transmit strength ≤ 10 mW
Wireless range (outdoors) ≤100m
Duty cycle @ 868.3 MHz < 1% per hour
@ 869,525 MHz < 10% per hour
Radiator valve connection M30 x 1.5 mm
Protection IP20
Mode of operation Type 1
Pollution degree 2
Environment temperature 0 °C to 50 °C
Humidity 5% to 80%
Dimensions
(width x height x depth)
48 mm x 57 mm x 103 mm
Weight (excluding batteries) 140 g

Bosch EasyControl Specifications

General

Brand	Bosch
Model	EasyControl
Category	Adapter
Language	English