Bosch ES 4 - User Manual

Questions and Answers

M
Michelle RussellAug 10, 2025
How to fix Bosch Measuring Instruments when water does not get hot?
- B
  bishopmelissaAug 10, 2025
  If your Bosch Measuring Instruments water isn't getting hot, first ensure the power supply is on and working. If the indicator light doesn't illuminate, check the high limit reset button. If the light works but the water remains cold, test for a plumbing crossover by shutting off the cold water supply and opening the hot water tap; any continuous flow indicates a crossover. Allow approximately 20 minutes for the water to heat up after filling the appliance. If problems persist, have a qualified technician test the heating element's resistance (8-10 ohms); replace the element if readings are outside this range.
S
Steven DawsonAug 15, 2025
What to do if the light is not on on Bosch ES 4 Measuring Instruments?
- S
  Scott GrayAug 15, 2025
  If the indicator light on your Bosch Measuring Instruments isn't working, but the water is hot, the bulb might be faulty and needs checking. Also, check the high limit reset button.
Q
qmarshallAug 22, 2025
Why is the water brown coming from Bosch ES 4?
- J
  Joseph MitchellAug 22, 2025
  If you notice brown or rusty water from your Bosch Measuring Instruments, it suggests a 'spent' anode rod and potential tank deterioration. Inspect the tank for any leaks and check the anode rod.
R
ryan13Aug 27, 2025
Why does the water from my Bosch ES 4 Measuring Instruments have an odor?
- H
  harristimothyAug 28, 2025
  Smelly water from your Bosch Measuring Instruments could result from a reaction between your local water supply and the heater's anode rod. Check the anode rod. Failure to do so may result in damage to the tank and leaks.
T
Tracie NewmanSep 2, 2025
What to do if Bosch ES 4 Measuring Instruments is leaking?
- C
  Carol LeeSep 2, 2025
  If your Bosch Measuring Instruments is leaking, inspect the water fittings and the T & P fitting on top of the tank. Remove the front cover and check the heating element gasket. If the tank itself is leaking, contact Bosch Water Heating for a warranty claim if it's still within the warranty period. Also, check the anode rod.