Need help?Do you have a question about the Bosch FPA-1000-UL and is the answer not in the manual?
Guides on power supply calculations and network wiring/fault detection.
Covers points, point types, features, and events for programming.
Explains zone mapping and discusses dual-zone and sandwich alarm features.
Covers address assignments, reporting requirements, and UL 864/NFPA standards.
Emphasizes precautions and UL requirements for correct installation.
Explains menu navigation, shortcuts, and accessing the system via a web browser.
Provides troubleshooting steps for communication failures and phone line issues.
Provides guidelines for battery maintenance and fuse replacement.
Lists compatible SLC devices and explains reporting codes.
General| Model | FPA-1000-UL |
|---|---|
| Voltage | 24 VDC |
| Battery Backup | Yes |
| Battery Capacity | 7 Ah |
| Type | Fire Alarm Control Panel |
| Power Supply | 120 VAC, 60 Hz, 0.5 A |
| NAC Outputs | 4 |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Relative Humidity | Up to 93% non-condensing |
| Weight | 15 lbs (6.8 kg) |
| Compliance | UL 864 |
To Next Page
