Need help?Do you have a question about the Bosch FAP-DO420 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | FAP-DO420 |
| Category | Fire Alarms |
| Language | English |
Details the components and layout of the fire detector.
Explains how optical, thermal, and chemical sensors detect fire events.
Outlines the integrated detection principles and combined sensor functions.
Describes the meaning of LED indicators for status and error reporting.
Lists key characteristics like self-monitoring, EMC compliance, and programmability.
Provides guidelines for planning detector placement, area coverage, and height.
Explains operating modes and considerations for detectors in LSN networks.
Identifies specific detector types suitable for high-radiation environments.
Details programming settings and sensitivity levels for specific multisensor detector types.
Covers programming options and sensitivity configurations for these detector models.
Explains programming and sensitivity settings for optical and dual-optical detectors.
Describes sensitivity classes and programming for heat detectors.
Introduces different detector base models and their mounting suitability.
Provides step-by-step instructions on how to install the detector base.
Details the wiring and connection procedures for detector bases and panels.
Specific instructions for connecting the MS 400 and MS 400 B detector bases.
Steps for connecting the FAA-MSR 420 detector base with a change-over contact relay.
Explains the function, variants, and programming of detector base sounders.
Guides on how to attach and lock the detector head onto the installed base.
Describes the procedure for safely removing detector heads from their bases.
Covers automatic and manual address allocation methods for detectors on the LSN loop.
Explains the purpose and function of the EOL module for line termination.
Details support plates used for labeling detector identification at different heights.
Describes the protective basket designed to safeguard detectors from damage.
Explains the use of a polypropylene dust cover during construction work.
Covers the detector console for specific installation types like above door frames.
Details the heating element required for environments prone to condensation.
Introduces remote indicators for situations where detectors are not directly visible.
Lists tools and accessories used for testing and servicing fire detectors.
Lists available detector types with their designations and product identification numbers.
Provides details on different detector base models and their corresponding product IDs.
Lists various accessories for detectors, including EOL modules and protective baskets.
Details accessories used for the installation of detectors, with product IDs.
Lists available detector base sounders and their respective product IDs.
Lists accessories used for servicing and testing fire detectors, with product IDs.
Provides general guidance and important notes for performing maintenance tasks on detectors.
Explains how to view detector operating data, serial numbers, and status using WinPara software.
Describes how detector types are identified using color codes around the central display.
Outlines procedures for functional testing of LSN improved version fire detectors.
Detailed test procedures for specific multisensor detector models like FAP-DOTC420.
Information regarding warranty claims, exchanges for defective detectors, and repair procedures.
Guidelines on the proper disposal of electrical and electronic devices according to regulations.
Information on how to access further product documentation and installation guides.
Provides definitions for common acronyms and technical terms used throughout the manual.
To Next Page
