Bosch FAP-DO420 - Order Information; Detector Variants; Detector Bases; Detector Accessories

Order Information
Detector Variants
Type number Designation Product ID
FAP-DOTC420 Dual-optical, thermal, chemical multisensor detector F.01U.116.034
FAP-OTC 420 Optical, thermal, chemical multisensor detector F.01U.508.816
FAP-DOT420 Dual-optical, thermal multisensor detector F.01U.116.033
FAP-OT 420 Multisensor Detector Optical/Thermal F.01U.508.815
FAP-DO420 Dual-optical smoke detector F.01U.116.032
FAP-O 420 Optical Smoke Detector F.01U.508.813
FAH-T 420 Heat Detector F.01U.508.915
FAP-O 420 KKW Optical smoke detector for use in areas with elevated
radioactivity
F.01U.508.687
FAH-T 420 KKW Heat detector for use in areas with elevated
radioactivity
F.01U.508.686
Detector Bases
Type number Designation Product ID
MS 400 Standard detector base, for surface-mount and flush-
mount cable insertion
4.998.021.535
MS 400 B Standard detector base, for surface-mount and flush-
mount cable insertion, Bosch-branded
F.01U.215.139
FAA-420-SEAL Damp room seal for MS 400 and MS 400 B detector
bases
F.01U.215.142
FAA-MSR 420 Detector Base with Relay F.01U.508.658
MSC 420 Additional base with damp room seal, for surface-
mount cable insertion
4.998.113.025
Detector Accessories
Type number Designation Product ID
FLM-320-EOL2W EOL module 2-wire F.01U.083.619
TP4 400 Support Plate for Detector Identification, installation
heights up to 4 m (1 pack = 50 pieces)
4.998.084.709
TP8 400 Support Plate for Detector Identification, installation
heights up to 8 m (1 pack = 50 pieces)
4.998.084.710
SK 400 Protective Basket to guard against mechanical
damage
4.998.025.369
7
7.1
7.2
7.3
34 en | Order Information
Automatic Fire Detectors LSN
improved
12/2012 | 8.1 | F.01U.003.448 Operation Guide Bosch Sicherheitssysteme GmbH