Bosch GardenPump 18 - Battery Charging Procedure; Charging Process Details

English | 17
Rainwater Pump GardenPump 18
Pump Battery Control Unit
Head pressure (H) m 17.5
Max. submersion depth
m 1.8
Max. water temperature
°C 35
Rated voltage V 18 18
Weight according to EPTA‑Procedure 01:2014 kg 0.6 0.6
Serial number see type plate on garden
tool
see type plate on garden
tool
The pump should only be used with the, GardenPump18, battery control unit.
Battery Li-Ion
Recommended ambient temperature during charging °C 0 … +45
Permitted ambient temperature during operation
A)
and storage °C -20 … +50
Rated voltage V 18
Number of battery cells at battery capacity
– Battery with 1.5 Ah 5
– Battery with 2.0 Ah 5
– Battery with 2.5 Ah 5
– Battery with 3.5 Ah 5
– Battery with 4.0 Ah 10
– Battery with 6.0 Ah 10
A) Limited performance at temperatures <0°C
Charger AL 1810 CV
Article number
EU 2 607 226 385
UK 2 607 226 387
Charging current A 1.0
Charging period (battery discharged)
– Battery with 1.5Ah min 94
– Battery with 2.0Ah min 124
– Battery with 2.5Ah min 154
– Battery with 3.0Ah min 185
– Battery with 4.0Ah min 244
– Battery with 6.0Ah min 364
Weight according to EPTA‑Procedure 01:2014 kg 0.17
Protection class
/ II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Charging the Battery
u Pay attention to the mains voltage. The voltage of the
power source must match the voltage specified on the
rating plate of the charger.
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
and 35 °C. In this manner, a high battery service life is
achieved.
Bosch Power Tools F 016 L81 984 | (07.11.2019)