Need help?Do you have a question about the Bosch REXROTH A4 Series and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | REXROTH A4 Series |
| Category | Water Pump |
| Language | English |
Defines the scope and validity of the manual for specific pump models and control valves.
Lists essential and supplementary documents needed for correct operation and commissioning.
Explains symbols, abbreviations, and safety instruction conventions used in the manual.
Specifies the authorized applications and purpose of the HS5E control system.
Details disallowed operations and potential liabilities for misuse of the product.
Outlines the necessary expertise and training for personnel handling the equipment.
Provides essential safety guidelines applicable to all users and operations of the product.
Warns against incorrect handling, mechanical stress, and inadequate lubrication to prevent damage.
Addresses risks from contaminated hydraulic fluid and proper disposal procedures for environmental protection.
Covers protection against corrosive conditions and hot components to ensure product longevity.
Lists all components and accessories included with the axial piston unit and HS5E control system.
Describes the functional capabilities and physical components of the axial piston unit and HS5E system.
Details the parallel and cascade control logic configurations for the HS5E system.
Specifies environmental operating limits and guidance on selecting appropriate hydraulic fluids.
Explains how to configure and operate multiple HS5E systems in a master/slave setup.
Provides instructions and safety guidelines for safely transporting the axial piston unit.
Outlines the required conditions and procedures for storing the axial piston unit to maintain its integrity.
Details the procedure for safely opening the product packaging and initial checks.
Specifies the environmental and site requirements for proper product installation.
Describes permissible mounting orientations and their implications for installation.
Covers the general steps and considerations for physically installing the axial piston unit.
Guides the user through the essential initial setup and checks before full operation.
Details the critical process of filling the unit with hydraulic fluid and removing air.
Covers establishing communication between the HS5E system and the IndraWorks software.
Details the necessary configuration of the control system parameters via IndraWorks.
Provides instructions for cleaning and maintaining the axial piston unit to ensure longevity.
Outlines regular checks and monitoring tasks for the hydraulic system and unit.
Information on ordering and identifying genuine spare parts for the product.
Details the step-by-step procedure for safely removing the axial piston unit from the system.
Provides a systematic approach for diagnosing and resolving product malfunctions.
Explains how to access and interpret the internal error and diagnosis logs for fault finding.
Lists common malfunctions, their possible causes, and recommended remedies for quick resolution.
Specifies electrical data, voltage supply, and pin assignments for the pilot valve.
Outlines the product's resistance to mechanical loads, EMC, climate, and humidity.
To Next Page