To Next PageTo Next PageHow to fix a dry saw chain on a Bosch Chainsaw?
If the saw chain on your Bosch Chainsaw is dry, it's likely due to one of two reasons: * There is no oil in the reservoir. Refill the oil. * The oil passage is clogged. Clean the oil passage.
What to do if my Bosch Chainsaw fails to operate?
If your Bosch Chainsaw fails to operate, there are several potential causes: * The kickback brake might be activated. To resolve this, pull the activation lever for the kickback brake. * The plug might not be properly connected. Ensure it is securely connected. * The mains socket could be faulty. Try using another socket. * The fuse might be faulty or blown. Replace the fuse. * The extension cable could be damaged. Try operating the chainsaw without the extension cable.
Why does my Bosch Chainsaw vibrate and not saw properly?
If your Bosch Chainsaw rips, vibrates, or doesn't saw properly, it could be due to a few reasons: * The chain tension might be too loose. Try tensioning the saw chain. * The saw chain might be dull. Sharpen or replace it. * The chain might be worn out. Replace the saw chain. * The chain teeth might be facing the wrong direction. Reassemble the chain in the correct direction.
Why is the saw chain/guide bar on my Bosch GKE 35 BCE Professional hot?
If the saw chain and guide bar of your Bosch Chainsaw are getting hot, it could be due to: * Lack of oil in the reservoir. Refill the oil. * A clogged oil passage. Clean the oil passage. * Chain tension being too high. Tension the saw chain. * A dull saw chain. Sharpen or replace the saw chain.
Why does my Bosch GKE 35 BCE Professional Chainsaw operate intermittently?
If the chain saw operates intermittently, it could be due to a defective mains cable. Check the mains cable and have it replaced if needed. Other causes could be external or internal wiring defects or a defective on/off switch, which require contacting your Bosch Service Centre.
Read all safety warnings and instructions to prevent electric shock, fire, or serious injury.
Maintain a clean, well-lit area, avoid explosive atmospheres, and keep bystanders away.
Use correct plugs, avoid grounded surfaces, protect from rain/wet, handle cords with care, use outdoor/RCD cords.
Stay alert, use protective equipment, prevent unintentional starts, and dress properly.
Use correct tool, maintain it, disconnect before adjustments, store safely, and keep tools sharp.
Understand kickback causes and prevention methods like firm grip, no overreaching, and correct chain.
Hold saw firmly, maintain secure footing, use gripping teeth, and avoid cutting above shoulder height.
Exercise caution with brush, saplings, and limbs under tension. Use trained professionals for complex jobs.
Wear hard hat, secure work area, fell only smaller trees, and avoid freeing jammed saws.
Read all safety warnings and instructions to prevent electric shock, fire, or serious injury.
Maintain a clean, well-lit area, avoid explosive atmospheres, and keep bystanders away.
Use correct plugs, avoid grounded surfaces, protect from rain/wet, handle cords with care, use outdoor/RCD cords.
Stay alert, use protective equipment, prevent unintentional starts, and dress properly.
Use correct tool, maintain it, disconnect before adjustments, store safely, and keep tools sharp.
Understand kickback causes and prevention methods like firm grip, no overreaching, and correct chain.
Hold saw firmly, maintain secure footing, use gripping teeth, and avoid cutting above shoulder height.
Exercise caution with brush, saplings, and limbs under tension. Use trained professionals for complex jobs.
Wear hard hat, secure work area, fell only smaller trees, and avoid freeing jammed saws.
General| Power Input | 2000 W |
|---|---|
| Bar Length | 35 cm |
| Weight | 4.2 kg |
| Power | 2000 W |
| Oil tank capacity | 0.2 l |
| Chain Type | 3/8" |
