-6-
LASER RADIATION. AVOID
DIRECT EYE EXPOSURE. DO NOT stare
into the laser light source. Never aim light
at another person or object other than the
workpiece. Laser light can damage
your eyes.
Read all instructions. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Do not direct the laser beam at persons or animals and do
not stare into the laser beam yourself. This tool produces
laser class 2 laser radiation and complies with 21 CFR
1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007. This can lead to persons
being blinded.
General Safety Rules
!
WARNING
Working safely with the
rangefinder is possible only
when the operating and safety
information are read
completely and the
instructions contained therin
are strictly followed. Never
make warning labels on the
Rangefinder unrecognizable.
Never aim the beam at a
workpiece with a reflective
surface. Bright shiny reflective
sheet steel or similar reflective
surfaces are not recommended
for laser use. Reflective surfaces
could direct the beam back
toward the operator.
Take care to recognize the
accuracy and range of the
device. Measurement may not
be accurate if used beyond the
rated range of the device.
Use of controls or adjustments
or performance of procedures
other than those specified
herein may result in hazardous
radiation exposure.
The use of optical instruments
with this product will increase
eye hazards.
Have the rangefinder repaired
only through qualified
specialist using original spare
parts. This ensures that the
safety of the rangefinder
is maintained.
Do not allow children to use
the rangefinder without
supervision. They could
Safety Rules for Rangefinder
!
WARNING
To Next Page
Loading...
