N
Nicholas HarrisSep 13, 2025
What to do if Bosch Measuring Instruments are not within operating temperature?
- SsnowdustinSep 13, 2025
Wait until the rangefinder has reached the operating temperature.
To Next PageTo Next PageWhat to do if Bosch Measuring Instruments are not within operating temperature?
Wait until the rangefinder has reached the operating temperature.
General| Accuracy | ± 1.5 mm |
|---|---|
| Display | LCD |
| Type | Laser Distance Measurer |
| Units of Measure | m, ft, in |
| Laser Type | 635 nm, <1 mW |
| Battery Type | AAA |
| Protection Class | IP54 |
| Power Supply | 2 x AAA batteries |
| Battery Life | Approx. 5000 measurements |
| Weight (without battery) | 100 g |
| Operating Temperature | 0°C to +40°C |
| Storage Temperature | -20 °C to 70 °C |
| Laser Class | Class 2 |
Explains safe usage practices for the rangefinder.
Details critical procedures to avoid hazards during operation.
Covers precautions related to battery handling and safety.
Guidelines for recycling and responsible disposal.
Identifies and defines the rangefinder's components and display indicators.
Instructions for battery insertion and hand strap attachment.
How to power the rangefinder on/off and its auto-off function.
Step-by-step guide on how to perform measurements.
Explains how to choose the starting point for measurements.
How to change units and set continuous laser beam.
How to perform standard length measurements.
Steps for calculating area and volume.
How to find shortest and greatest distances.
Measuring distances indirectly using Pythagorean theorem.
Calculating the sum of multiple surface areas.
How to track continuous measurements and clear values.
Saving, adding, and subtracting measurements from memory.
How to view and clear stored memory contents.
General guidance on how to use the rangefinder.
Using tripod, extension pin, and vial level for measurements.
Addresses common problems and provides solutions.
Guidance on cleaning, repair, and environmentally friendly disposal.
Details the warranty terms and conditions for the product.
