English | 9
Bosch Power Tools 1 619 P07 176 | (12.1.09)
Technical Data
Assembly
f Before any work on the machine itself, pull
the mains plug.
Auxiliary Handle (see figure A)
f Operate your machine only with the auxilia-
ry handle 12.
The auxiliary handle 12 can be set to any posi-
tion for a secure and low-fatigue working pos-
ture.
Turn the wing bolt for adjustment of the auxilia-
ry handle 11 in anticlockwise direction and set
the auxiliary handle 12 to the required position.
Then tighten the wing bolt 11 again in clockwise
direction.
Impact Drill GSB 20-2
Professional
GSB 20-2 RE
Professional
Article number
0 601 184 2.. 0 601 184 6..
Rated power input
W 701 701
Output power
W 380 380
No-load speed
– 1st gear
– 2nd gear
min
-1
min
-1
1000
3000
0–1000
0–3000
Rated speed
– 1st gear
– 2nd gear
min
-1
min
-1
600
2200
0–600
0–2200
Impact rate
min
-1
48000 48000
Rated torque
– 1st gear
– 2nd gear
Nm
Nm
5.1
5.1
2.0
2.0
Spindle collar dia.
mm 43 43
Speed preselection
– z
Right/left rotation
– z
Max. drilling dia.
–Concrete
– Steel
– Wood
mm
mm
mm
20
13
40
20
13
40
Chuck clamping range
mm 1.5–13 1.5–13
Weight according to EPTA-Procedure 01/2003
kg 2.1 2.2
Protection class
/II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
OBJ_BUCH-903-001.book Page 9 Monday, January 12, 2009 3:48 PM
To Next Page
Loading...
