English | 7
Bosch Power Tools 1 609 92A 363 | (24.11.16)
Safety Warnings for Sander
Use the machine only for dry sanding. Penetration of wa-
ter into the machine increases the risk of an electric shock.
Caution, fire hazard! Avoid overheating the object
being sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or
less.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for dry sanding of wood, plastic, filler
and coated surfaces.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Thumbwheel for orbit frequency preselection
2 On/Off switch
3 Lock-on button for On/Off switch
4 Dust box, complete (Microfilter System)
5 Sanding-sheet clamp
6 Sanding plate
7 Sanding sheet
8 Release button for front clamping bracket
9 Front clamping bracket
10 Perforating tool*
11 Screws for sanding plate
12 Extraction outlet
13 Filter element (Microfilter System)
14 Vacuum hose*
15 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Assembly
Before any work on the machine itself, pull the mains
plug.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one’s health. Touching or breathing-in the dust can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dust, such as oak or beech dust, is considered car-
cinogenic, especially in connection with wood-treatment
additives (chromate, wood preservative). Materials con-
taining asbestos may only be worked by specialists.
–As far as possible, use a dust extraction system suitable
for the material.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
Orbital sander GSS 23 AE
Article number
3 601 K70 7..
Rated power input
W190
Preselection of orbital stroke
rate
No-load speed
min
-1
7000 – 12 000
No-load orbital stroke rate
min
-1
14000 – 24000
Orbit diameter
mm 2.0
Sanding sheet dimensions
– Adhesion via Velcro backing
– Attachment via clamping
mm
mm
93 x 185
93 x 230
Sanding plate dimensions mm 92 x 182
Weight according to
EPTA-Procedure 01:2014
kg 1.7
Protection class
/II
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-243-003.book Page 7 Thursday, November 24, 2016 2:16 PM
To Next Page
Loading...
