To Next PageTo Next Page
Need help?Do you have a question about the Bosch GSI 14 CE and is the answer not in the manual?
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Keep work area clean and well lit; do not operate in explosive atmospheres.
Ensure proper grounding, avoid body contact with earthed surfaces, and protect from water.
Stay alert, use common sense, and wear appropriate personal protective equipment.
Observe all warnings, use correct accessories, and ensure they match tool specifications.
Wear safety goggles and follow specific precautions for outdoor use or damp locations.
The power tool is intended for dry sanding, structuring, satin-finishing, and matt-finishing of metal surfaces.
Lists and refers to numbered components of the machine shown in the graphics page.
Measured sound values and vibration total values determined according to EN 60745.
Instructions for mounting the auxiliary handle and dust cover.
Observe mains voltage and how to start the machine.
Procedure for starting, locking, and switching off the power tool.
How to preselect the speed using the thumbwheel.
Tips for optimal removal capacity, surface quality, and tool longevity.
Recommendations for storing sanding belts to maintain their quality.
Procedures for cleaning and maintaining the machine for safe operation.
Information on customer service, repairs, spare parts, and application advice.
General