English - 1
1 Rotatable top handle with pushbutton
2 Stroke rate preselection thumbwheel
(GST 85 PE/GST 85 PAE/GST 2000)
3 Allen key
4 On/Off switch
5 Vacuum connection (GST 85 PAE)
6 Switch for sawdust blowing device
7 Lever for adjustment of pendulum action
8 Base plate with mit interior extraction
channel (GST 85 PAE)
9 Stroke rod
10 Guide roller
11 Saw blade*
12 Access clip (GST 85 PAE)
13 Contact protector
14 Scale
15 Screw
16 Angle gauge**
17 Thread
18 Positioning pin/marking
19 Splinter guard
20 Screw for replaceable base-plate cover
(GST 85 PAE)
21 Replaceable base-plate cover
(GST 85 PAE)
22 Slider (GST 85 PAE)
23 Circle Cutter/Parallel Guide*
* Not all of the accessories illustrated or described are
included as standard delivery.
**Commercially available (not included in the delivered
items)
Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of
the product is 83 dB (A).
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
The typically weighted acceleration is 4 m/s
2
.
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the work-
piece. It is suitable for straight and curved cuts
with mitre angles to 45°. The saw blade recom-
mendations are to be observed.
Tool Specifications
Jigsaw GST 85 P GST 85 PE
GST 85 PAE
GST 2000
Order number 0 601 584 1.. 0 601 584 6..
0 601 584 8..
0 601 584 6..
Rated power [W] 580 580 580
Output power [W] 350 350 350
Stroke rate at no-load [spm] 3100 500–3100 500–3100
Stroke [mm] 26 26 26
Stroke rate preselection – • •
Cutting capacity:
– in wood, max. [mm] 85 85 85
– in aluminium, max. [mm] 20 20 20
– in non-alloy steel, max. [mm] 10 10 10
– in stainless steel alloy, max. [mm] – 3 3
Bevel cuts (left/right) [°] 0–45 0–45 0–45
Weight (without accessories), approx. [kg] 2.4 2.4 2.4
Protection class / II / II / II
Please observe the order number of your machine. The trade names of the individual machines may vary.
Machine Elements
Noise/Vibration Information
Intended Use
12 • 2 609 931 878 • TMS • 26.09.02
To Next Page
Loading...
