en Installation instructions
34
Cable colour Cable type
Blue Neutral conductor (zero)
Brown Phase conductor (external
conductor)
17.10 Securing the appliance
¡ Slide the appliance in fully and centre it.
¡ Screw the appliance into place.
The gap between the worktop and the appliance must
not be closed by additional battens.
Do not attach any thermal insulation strips to the side
panels of the surround unit.
To remove:
¡ Disconnect the appliance from the power supply.
¡ Undo the fastening screws.
¡ Lift the appliance slightly and pull it out completely.
To Next Page
Loading...
