58300000202443_ARA_EN_C JANUARY 2018 Service Manual for Bosch 800 Series Built-in Wall Ovens
Page 10 of 43
Copyright by BSH Home Appliances Corporation 1901 Main St ▪ Suite 600 ▪ Irvine, CA 92614 800 944-2904
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
4.2.1 Elements Used by Cooking Mode
The table below reflects the elements which are used for each
cooking mode.
Upper and lower elements cycle to
maintain oven temperature
Broil
Broil
Intense heat is radiated from the upper
Upper and lower elements cycle to
maintain oven temperature; more
intense heat from the upper element is
Upper and lower elements cycle to
maintain a low oven temperature
Proof Dough
Lower element is used to maintain a low
temperature
Self-clean
Broil, Bake
Upper and lower elements cycle to
maintain oven temperature; more
intense heat from the upper element is
Upper and lower elements cycle to
maintain oven temperature, and the
heat is circulated by the convection fan
Convection Broil
Broil, Conv Fan
Intense heat is radiated from the upper
element and the convection fan
Convection Roast
Broil, Bake,
Conv Fan
Upper and lower elements cycle to
maintain oven temperature and air is
circulated by the convection fan; more
intense heat from the upper element is
Heat is generated by the convection ring
element and circulated by the
convection fan.
Pizza
Upper and lower elements cycle to
maintain oven temperature, and the
heat is circulated by the convection fan
4.2.2 Element Duty Cycles
A two-point control is used for all cooking modes.
Table 3 Active elements by cooking mode
Table 4 Element duty cycles during Preheat
To Next Page
Loading...
