WALL INSTALLATION, SINGLE OVEN
Secureoven to cabinet uSklgthe screws
movlded. Screws should be Inserted
.= Ihrough the mountln_ holes In _e
posi_ora _ldicat_d in me frame (o_m
! doorto see flame and mounlJngho_esI.
Donot ov_tighten screws.
Nnte:
.
.
.
4
.
Do not slide oven across floor. Dam-
age to floor covering or floor could re-
sult.
The oven support surface must be a
minimum 3/4" thick plywood plat-
form, solid, level and flush with the
bottom of the cabinet cutout.
Use extreme caution when moving or
installing the oven. It is very heavy.
Be very careful when moving or in-
stalling the oven to avoid damage to
the oven frame or damage to the cabi-
nets.
Be sure to level oven. An oven that is
not level may provide poor or incon-
sistent baking results.
6. Be careful when placing oven. DO
NOT pinch the conduit between the
oven back or wall and the inner cabi-
net wall or floor.
%
Securely fasten oven to cabinet using the
screws provided. Failure to do so could result
in oven moving or tipping during use and
causing damage to the oven or cabinets or per-
sonal injury.
To Next Page
Loading...
