EasyManua.ls Logo

Bosch HGI8046UC - 7 Oven operation; 7.1 Setting the heating mode and temperature; 7.2 Turning the oven off; 7.3 Heating time limitation

Bosch HGI8046UC
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en-us Oven operation
22
Flame Image Measure
Completely or mostly
yellow
Verify that the regulator is set for the correct fuel. Retest
after adjustment.
Yellow tips on outer
cone
Normal for LP gas
Soft blue Normal for natural gas
Oven operation
7 Oven operation
Oven operation
Here you will find out everything you need to know about
operating your oven.
7.1 Setting the heating mode and
temperature
1. Press the button for the desired heating mode.
a The heating mode and the default temperature are
displayed.
a The temperature flashes to show it can be edited.
2. If desired, enter a temperature using the numeric
keypad.
3. Press Enter.
a The oven begins to preheat. The "preheating" is
displayed and the preheat bar begins to fill up until
the set temperature is reached.
7.2 Turning the oven off
Press Oven Clear/Off.
a The oven turns off and the clock is displayed.
7.3 Heating time limitation
The maximum heating time is limited. If you forget to turn
off the oven, it turns off automatically after a set period of
time.
The maximum time for Sabbath mode is 74hours. For all
other heating modes the maximum allowed time is
24hours.
Temperature °F (°C) Max. time allowed without
activity
100-200
(30-120)
24hours
201-550
(121-300)
12hours
7.4 Fast preheat
With this function you can shorten the time the oven needs
to reach the set temperature.
Fast preheat is available for the following heating modes:
¡ Bake
¡ Conv Multi-Rack
¡ Conv Bake
¡ Conv Roast
¡ Pizza
Setting fast preheat
1. Set the desired heating mode.
2. Enter the desired temperature using the numeric
keypad.
3. Press Fast Preheat.
Note:If fast preheat is not allowed for the selected
heating mode an error tone sounds.
4. To turn off fast preheat press Fast Preheat again.
7.5 Meat probe
The meat probe measures the internal temperature of the
food. You can set a core temperature and the heating
mode turns off automatically as soon as the set
temperature is reached.
WARNING
Use of a wrong meat probe can damage the insulation.
Use only the meat probe intended for this appliance.
The meat probe can be used with the following heating
modes:
¡ Bake
¡ Roast
¡ Conv Bake
¡ Conv Multi-Rack
¡ Conv Roast
¡ The probe function is not available when an oven timer
has been set.
¡ The meat probe measures the temperature on the
inside of the food between 85°F (30°C) and 210°F
(99°C).

Table of Contents

Other manuals for Bosch HGI8046UC

Related product manuals