Bosch HHF113B 0B Series - Before Using for the First Time; 5.1 Initial Configuration; 5.2 First-Time Cleaning; Basic Operation

Before using for the first time en
9
5 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
5.1 Initial configuration
You have to implement settings for the initial configura-
tion before you can use your appliance.
5.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Remove the accessory and the leftover packaging,
such as polystyrene pellets, from the cooking com-
partment.
2.
Before heating, wipe the smooth surfaces in the
cooking compartment with a soft, damp cloth.
3.
Ventilate the room while the appliance is heating.
4.
Set the type of heating and the temperature.
→"Basic operation", Page9
Type of heat-
ing
3D hot air
Temperature Maximum
Cooking time 1hour
5.
Switch off the appliance after the specified cooking
time.
6.
Wait until the cooking compartment has cooled
down.
7.
Clean the smooth surfaces with soapy water and a
dish cloth.
8.
Clean the accessory with soapy water and a dish
cloth or a soft brush.
6 Basic operation
6.1 Switching on the appliance
▶
Turn the function selector to any position other than
the "Off" position ⁠.
a The appliance is switched on.
6.2 Switching off the appliance
▶
Turn the function selector to the "Off" position ⁠.
a The appliance is switched off.
6.3 Types of heating and temperature
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature
or grill setting.
a The appliance starts heating after a few seconds.
3.
When the dish is ready, switch off the appliance.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the types of heating.
¡ You can also set a cooking time and an end time
on the appliance.
→"Time-setting options", Page9
Changing the type of heating
You can change the type of heating at any time.
▶
Use the function selector to set the required type of
heating.
Changing the temperature
You can change the temperature at any time.
▶
Turn the temperature selector to set the desired
temperature.
7 Time-setting options
Your appliance has different time-setting options which
ensure that operation can be controlled.
7.1 Overview of the time-setting options
You can use the button to select the different time-
setting options.
Time-setting
option
Use
Timer The timer can be set independently
of the operation. It does not affect
the appliance.
Cooking time If a cooking time has been set for
the operation, the appliance stops
heating automatically once this time
has elapsed.
Time-setting
option
Use
End A time at which the operation ends
can be set for the cooking time. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time Set the time.
7.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set up to 23 hours
and 59 minutes regardless of whether the appliance is