Product diagram
Manifold 2 to 6 units
Bosch 32 models (KM3211WHNG/LP) have the ability to be
linked in series (manifolded). For 2 units, the quick
connection cable (KMQC0703339) can be used to allow the
units to share the work load. 3 to 6 units can be used in
rotation with a fully electronic rotation manifold system
controller (KMSC201). The system controller allows the work
load to be shared evenly between the manifolded units.
* Note: When manifolding 2 or more Bosch 32 models, you
are required to install a main controller (RCM3211) for
electronic staging.
Manifolds can also be combined with Bosch-Everlast
stainless steel tanks (315 ltr storage capacity).
Bosch Commercial combination sizing guide
Bosch 32 Series manifolds can be combined with Bosch-
Everlast stainless steel tanks (for tank part numbers see
page 14). The table below shows some of the possible
burner-tank combinations and the approximate capacities the
manifolds can deliver in the 1st and 2nd hour at a 50°C
temperature rise.
Manifolding options2.3
There are many more
combinations than are
listed. Please refer to the
Bosch customer contact
centre (Australia: 1300 30
70 37; New Zealand: 0800
54 33 52) or visit www.
bosch.com.au to find your
local Bosch agent.
The Bosch 26e Highflow, along with being the flagship of the
domestic range of water heaters, can also be used in
commercial applications. One option is to hydraulically
manifold these units in conjunction with a Bosch-Everlast
storage tank.
System Tank size
Number of
Bosch units
1
st
hour litres
at a 50°C rise
2
nd
hour litres
at a 50°C rise
Gas usage
(MJ/h)
26e 315 ltr 1 1095 780 200
26e 315 ltr 2 1875 1560 400
26e 315 ltr 3 2655 2340 600
26e 315 ltr 4 3435 3120 800
26e 315 ltr 5 4215 3900 1000
32 315 ltr 1 1275 960 250
32 315 ltr 2 2235 1920 500
32 315 ltr 3 3195 2880 750
32 315 ltr 4 4155 3840 1000
32 315 ltr 5 5115 4800 1250
To Next Page
Loading...
