Professional Packs are specifically designed for
commercial use. They are suitable for
applications that require a large volume of hot
water for peak demand. All Bosch Professional
Packs come with the following components –
Bosch hot water system, Bosch-Everlast
stainless steel storage tank, built-in
thermostat, shroud, PTR valve and pump. They
are pre-assembled, ready to be installed and
will be shipped directly to site. This means an
easy installation and low set-up costs.
The 315 litre Bosch-Everlast stainless steel
storage tank included in Bosch Professional
Packs comes standard with 32mm ports.
Bosch-Everlast stainless steel storage tanks
can also be purchased separately. A 315 litre
model with 32 mm ports (part number: 315C2)
as well as a 315 litre model with 50mm ports
(part number: 315C250) is available. The
315C250 storage tank is not available as part
of a Bosch Professional Pack.
Models
C31526ELP C31526ENG C31532WHLP C31532WHNG
Gas Type LP NG LP NG
Tank Size (ltr) 315 315 315 315
System Size 26e 26e 32 32
Internal installation:
C31532WHLP and C31532WHNG may be installed internally
with appropriate flueing. Please consult AS 5601 or NZ 5621.
Professional Packs2.2
Bosch Professional Packs come in the following system-tank combinations:
Model C31532WHNG
(with shroud)
Model C31532WHNG
(without shroud; vent cap
KMVC100 as shown is a
required accessory for
external installations)
To Next Page
Loading...
